0

Your Cart is Empty

Envy Prodigy S9 Pro Scooter Deck

  • The Prodigy S9 Deck is straight out of the Prodigy S9 Complete, with a new Oil Slick colorway. Made from the highest grade 6061 T6 Aluminum and weighing only 3.2lbs. The Prodigy Deck comes in at 580mm (19.8") long x 120mm (4.7") wide. The ninth generation of the Prodigy deck features a Nylon Front Plate, Rear Deck Inserts, 2018 Rear Spacer System and the Nylon V1 Brake. This deck is the perfect base to build your custom pro scooter upon.

    The Envy Prodigy Deck is 4.7" wide by 19.8" long, with an 82.5 degree headtube angle. Headtube angle affects a couple of things. The longer rake of the Envy Deck makes it perfect for those riders who want more stability and precise steering due to the longer rake of the headtube. Because the deck does not have boxed ends, we consider the Envy Scooter Deck to be a park deck but it's equally at home at the skatepark or in your hood. PRO SCOOTER DECKS that are 19-19.99" long will be ideal for intermediate to pro riders that have been in the sport for a while or for those scooter riders that need a little more footspace. The Envy Prodigy S9 Deck works with the following wheel diameters: 100mm,110mm,115mm,120mm and the following wheel widths: 24mm,26mm,28mm,30mm. Note that decks typically come standard with 24mm spacers. If you change the wheel core width, you will also need to change your spacers to accomodate the new wheel core width.

  • Envy Prodigy S9 Pro Scooter Deck Specifications

      • Weight: 3.2lbs
      • Length: 19.8"
      • Width: 4.7"
      • Material: Aluminum
      • Headtube Angle: 82.5 degrees
      • Axle size Compatibility: 8mm
      • Wheel Diameter Compatibility: up to 120mm
      • Wheel Width Compatibility: up to 30mm ( With aftermarket Spacers )
      • Peg Compatibility: Yes
      • 12 STD compatibility: No
      • Headtube cut-out: Yes
      • Concavity: No
      • Grip Tape included: No
      • Hardware/Brake included: Yes
      • Available colors: OIL SLICK

          - % DISCOUNT APPLIED AT CHECKOUT!

          - SAME DAY SHIPPING (when ordered by 2pm CST)

              Pro scooter decks are compatible with wheels, grip tape, and headsets.

              HEADSETS

              Headsets contain the bearings that sit in your scooter deck upper and lower headtube cups, which allow your forks and bars to spin in unison. There are two types of headsets – integrated and standard. Very few scooters these days are made with standard headsets. In fact, we don’t even sell them since every deck on our site is an integrated deck. On our site, all headsets work with all decks since they are all integrated. On other sites, verify that your headset and deck are either both standard or both integrated.

              GRIP TAPE

              Decks vary vastly in size so, if you are purchasing grip tape, make sure that it is approximately the same size as your deck. Larger sheets of grip tape may have to be cut down to fit your deck, while smaller sheets may not fit a larger deck. In other words, we don’t recommend buying smaller sheets of grip tape for a large deck. You can always buy a large sheet of grip tape for a smaller deck but it may require cutting to get it to fit properly.

              WHEELS

              There are three things to know about wheels as it relates to scooter decks. (1) The wheel outer diameter must be compatible with the wheel diameter of the deck. (2) The wheel width must be compatible with the deck spacers that come on the rear axle of your deck (and forks). (3) Rules 1 and 2 also apply to your forks. In other words, if you are running 120mm diameter wheels with a 30mm width, both your deck and forks must be able to accommodate 120x30 wheels. It’s wise to check wheel compatibility on any deck that you want to purchase, but most decks and forks are designed to work with conventional 110x24 or 120x24 wheels. When running an unconventional size wheel (120x30,110x30,115x28,etc), please double check the wheel compatibility of your deck and forks.