FREE SHIPPING ON ORDERS OVER $199

Tilt ARC SCS Clamp


The Tilt ARC SCS clamp features a profile machined face. This freestyle scooter clamp is structurally balanced putting the material and strength where needed. The Arc SCS uses the same custom bolts as the Classic SCS with a 6mm hex key drive and 50% larger threads provide more clamping power and help keep the compression tight and bars in place. Every clamp bolt from Tilt comes with pre-applied anti-seize to prevent them from seizing to the clamp. For added compatibility, the removable shim allows use with either standard or oversized PRO SCOOTER BARS. The Tilt SCS clamp is an aluminum SCS compression system. The ARC SCS is a full size SCS because it is slightly larger than a baby SCS but provides maximum clamping power. The Tilt SCS clamp only works with SCS bars without a slit. While SCS compression is more expensive than other compression systems, it is the most effective compression system you can put on a pro scooter. The ARC SCS includes a shim and works with both oversized and standard outer diameter pro scooter bars without a slit. The Tilt ARC SCS includes M8 bolts for maximum clamping power. M8 bolts are much less likely to strip than M6 bolts. It is a good practice with any compression bolt to tighten each bolt 1/2 turn at a time, one bolt at a time, until all bolts are completely tight. The Tilt SCS clamp works with the SCS compression ONLY.

Tilt ARC SCS Clamp Specifications

    • The Arc SCS uses the same custom bolts as the Classic SCS with a 6mm hex key drive and 50% larger threads provide more clamping power and help keep the compression tight and bars in place.
    • fits standard OR oversized outer diameter bars with NO SLIT only
    • 6061-T6 Aluminum
    • 3"; raises bars 1.5 inches
    • weighs in at just 7.9 ounces


    Compatible Scooter Forks



    Compatible Scooter Forks

    Customer Reviews

    Based on 2 reviews
    100%
    (2)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    S
    S.S.
    Smokin Scooters review - Tilt ARC SCS Clamp

    If you are not familiar with Tilt and you ride scooters, you should be. Tilt simply makes the best products in the industry. From the best fit and finish in the scooter industry to the rugged M8 bolts that have 50% larger threads than most clamps to increase grip and decrease potential stripping, Tilt simply makes the best SCS on the planet. And did we mention how good they look. While the Classic SCS is simple in its approach, the face of the ARC SCS is machined for an upgraded look. The ARC SCS fits oversized bars as sold but can easily be modified to work with standard OD bars by purchasing a shim separately. Finally, Tilt offers the ARC SCS LT, which is a slightly lighter version of the ARC SCS but the ARC LT only works with standard bars. If you are looking for the ultimate SCS, look no further than the Tilt ARC SCS - it is simply the best SCS on the market today.

    K
    K.K.
    Five Stars

    "Very nice"

    Subscribe

    x