FREE SHIPPING ON ORDERS OVER $199

0

Your Cart is Empty

Tilt Sculpted Double Clamp

1 item left
  • In a world of complex appearances, the Tilt Sculpted Double Clamp presents a subtle, well designed option for the riders who prefer to keep it cool. Custom bolts with a 6mm hex key drive and 50% larger threads provide more clamping power and help keep the bars in place and compression tight. Every clamp bolt from Tilt comes with pre-applied anti-seize to prevent the bolts from seizing to the clamp. The Tilt scooter clamp is an aluminum double clamp. Double clamps are super light weight and the choice of most pro scooter riders, whether they ride street or park. Double clamps only have 2 bolts to compress your bars around your forks so, while they are effective, a triple or quad clamp will provide more clamping power and reduce the frequency with which you will have to tighten your clamp bolts. The Tilt clamp was designed to work with oversized and standard PRO SCOOTER BARS with a slit but only works with oversized outer diameter bars as sold. A shim must be purchased separately for the Tilt scooter clamp to work with standard bars. was designed to work with oversized and standard pro scooter bars with a slit but only works with oversized outer diameter bars as sold. A shim must be purchased separately for the Tilt scooter clamp to work with standard bars. The Tilt double clamp includes M8 bolts for maximum clamping power. M8 bolts are much less likely to strip than M6 bolts. It is a good practice with any compression bolt to tighten each bolt 1/2 turn at a time, one bolt at a time, until all bolts are completely tight. The Tilt scooter clamp works with the following types of compression: ICS,ICS10,IHC,HIC,TCS.

  • Tilt Sculpted Double Clamp Specifications

      • Double clamps are very light weight and are the choice of most pro scooter riders who rider IHC or HIC compression. May require more frequent tightening than a triple or quad clamp.
      • fits OVERSIZED bars without shim; requires optional shim to work with STANDARD bars
      • 6061-T6 Aluminum
      • CNC machined to reduce weight to 3.6 ounces
      • 1.875"

    Subscribe